Sourcing Requirements
VALVE: TYPE: GLOBE CHANNEL STREAM; VALVE SIZE: 50 MM; DESIGN RATING 6400 KPA; TEMPERATURE RATING: 150 DEG C; FACE TO FACE LENGTH: 300 MM CONNECTION: RAISED FACE INTEGRAL FLANGED 50 MM; OPERATED: ELECTRICAL ACTUATOR; BODY MATERIAL: CS; STYLE: MARK 1 GLOBE; TRIM: UNBALANCED ANTI CAVITATION; GRADE: CAT II; SPECIFICATION: ASTM A564/A564M TYPE 360 EN10088-ED 2009; SOFTGOODS: PTFE V RING SINGLE PACKING PTFE GASKET; REFERENCE NO 70335.001; HIGH PRESSURE CONTROL VALVE USED IN THE FUEL OIL PLANT; MUST CONTROL THE UPSTREAM PRESSURE AT 4500 KPA BY RELIEVING EXCESS PRESSURE TO PUMP SUCTION SIDE; CONTROLLED BY AUMA ELECTRIC MULTI TURN ACTUATOR (SAR 07.2-F10; STROKE: 1.50; FAILURE MODE: IN PLACE; HANDWHEEL: MANUAL OVERRIDE) MAX INLET PRESSURE: 5200 KPA; TYPICAL INLET PRESSURE: 4500 KPA; TYPICAL OUTLETPRESSURE: 350 KPA; LARGE PRESSURE DROP REQUIRES ANTI CAVITATION TRIM TYPICAL FLUID TEMPERATURE: 110 TO 120 DEG C; PROCESS FLUID: BUNKER 150 HFO DESIGN PRESSURE: 6400 KPA; DESIGN TEMPERATURE: 150 DEG C; VALVE MODEL OR TYPE: MARK ONE CHANNELSTREAM GLOBE VALVE; SIZE: 2 IN; PRESSURE CLASS: CL 600;BODY FORM: CAST; TRIM # - CV:.88C CV: 9.5 3STG; CHARACTERISTIC: LINEAR; STAGES: 3;RET GUIDING: CD_1500; FLOW DIRECTION: FLOW OVER; BODY MATERIAL: CARBON STEEL WCC; BONNET MATERIAL: CARBON STEEL; END CONNECTION: INTEGRAL FLANGE,RAISED FACE, 50 MM; FACE TO FACE: ISA S75.08.01, 300 MM; FLANGE FINISH: 125 TO 250 RA; BONNET: EXTENDED; TRIM TYPE: UNBALANCED; PLUG MATERIAL/FACING/STEM COVER: 431/FULL CONT. ALLOY 6; STEM MATERIAL/FACING/PILOT SPRING: ALLOY 6; LGA;SEAT RING MATERIAL/FACING: 316 SS/FULL BORE ALLOY 6; RETAINER MATERIAL: 416 SSHT; GUIDES UPPER OR LOWER: BRONZE C93200/ALLOY 6; PACKING MATERIAL/STYLE/VAC: PTFE V-RING/SINGLE; BODY BOLTING: B7-2H ZINC PLATED GASKETS: PTFE; GLAND FLANGE MATERIAL: STAINLESS STEEL; GLAND FLANGE BOLTING: CARBON STEEL; ZINC PLATED; INGRESS RATING: IP64; REQUIREMENTS: RAD EXM; DRAWINGS; ASSEM HYDRO; SEAT LEAK/CRYO TEST; CERT OF CONF (SANS 347:2012); TEST CERTIFICATES; MATERIAL CERTIFICATES; X-RAY REPORTS; MAGNETIC PARTICLE TEST REPORTS; PARTS LIST; INSTALLATION, OPERATING AND MAINTENANCE MANUALS FOR BOTH THE VALVE AND THE ACTUATOR; AUMA ACTUATOR TO BE FREE ISSUED ON REQUEST; MUST BE SUPPLIED AS A UNIT WITH A LINEAR THRUST UNIT SUCHAS AUMA LE 25.1; THRUST: 11.6/23 KN; STROKE: 100 MM; STEM THREAD: 26X5 LH FACTOR: 2.6; CORROSION PROTECTION: KS; ENCLOSURE PROTECTION: IP 67 LUBRICATION: F13; FITTED TO ACCOMMODATE THE MULTI -TURN ACTUATOR WITH THELINEAR (PUSH-PULL) VALVE