Sourcing Requirements
Managed Layer 2 network switch with PoE support Quantity 15 (fifteen) units Purpose The equipment to be procured is intended for Ethernet traffic switching within a corporate network, connecting network devices, and supplying power to connected devices using Power over Ethernet (PoE) technology The equipment must ensure reliable operation of the existing network infrastructure and be compatible with the current network infrastructure based on MikroTik equipment or equivalent ________________________________________ 2. Functional Requirements 2.1 Interfaces At least 24 Gigabit Ethernet ports (10/100/1000Base-T) At least 4 SFP+ (10GbE) ports for backbone or fiber optic connections 2.2 Switching Performance Switching capacity: at least 128 Gbps Non-blocking throughput: at least 64 Gbps Packet forwarding rate: at least 95 Mpps 3. PoE Support The switch must support Power over Ethernet (PoE) for connected devices IEEE 802.3af IEEE 802.3at Passive PoE or equivalent Requirements All Ethernet ports must support PoE Total PoE budget: at least 450 W Maximum power per port: at least 30 W The following capabilities must be provided power consumption monitoring PoE power allocation management per port 4. Supported Network Functions VLAN (IEEE 802.1Q) – at least 4096 VLANs STP / RSTP / MSTP Link Aggregation (IEEE 802.3ad / LACP) Static link aggregation Port Mirroring IGMP Snooping ACL (Access Control Lists) 5. Management The switch must support CLI management Web interface management SNMP support Dedicated console management port Specialized software application for secure remote administration 6. Operating System At least two operating modes 1. Layer 2 switch mode 2. Advanced network management mode Switching between operating modes must be performed via software without any hardware intervention 7. Hardware Parameters Form factor 1U chassis Mounting in a 19-inch rack Dimensions Not more than 445 × 310 × 50 mm 8. Power Supply Built-in power supply unit Input voltage: AC 100–240 V Maximum power consumption: not more than 500 W Power consumption without PoE load: not more than 50 W 9. Cooling Active cooling system Automatic fan speed control 10. Operating Conditions Operating temperature range Not worse than –20 °C to +60 °C 11. Standards and Certification The equipment must comply with the following certifications CE EAC RoHS 12. Scope of Supply Network switch IEC power cable Rack mounting kit User manual Technical documentation