Russia Buyer Purchasing Driveshaft Test Bench

1. Equipment Type Test bench for cardan shafts (driveline shafts) 2. Purpose and General Requirements The bench is designed for comprehensive quality control and technical condition assessment of cardan shafts 3. Required Technical Characteristics 4.1 Main Parameters Torque Range: 0 to 12, 000 N·m Rotational Speed Range: 100 to 5, 000 rpm Permissible Articulation Angle (Joint Angle): 0 to 15° Minimum Specimen Length: No restrictions Maximum Specimen Length: 3, 000 mm Torque Measurement Accuracy: +/- 1% Speed Measurement Accuracy: +/- 0, 5% 4.2 Design Requirements gh-rigidity frame with anti-vibration mounts Electric drive with variable frequency control and energy recovery (recuperation) Loading unit with smooth torque adjustment capabilities Shaft mounting system with quick-change adapters for different sizes Sensors: Torque, rotational speed, vibration (accelerometers), temperature, and angular position PC-based data acquisition and processing system with software for visualization and archiving 4.3 Safety Requirements Automatic shutdown upon exceeding permissible loads Protective guards for rotating parts Emergency stop button Audible and visual status signaling 4.2 Utility Requirements 3-phase AC, 50 Hz Voltage: 380V Minimum operating pressure: 5.5 bar Maximum operating pressure: 7 bar 5. Operating Conditions Peak Load Schedule: 2 shifts of 12 hours, 7 days a week Annual Operation: 11 months per year Equipment Utilization Factor: 0.85