a cold feed single screw extruder for producing a Blu Tack type adhesive compound. review the technical requirements below and confirm that you can supply a suitable machine, along with and delivery time 1) MATERIAL Blu-Tack type adhesive compound Pre-mixed, cohesive, non-free flowing Cold extrusion only (no additional heating) Shear-sensitive material Density approx. 1.2kg/L 2) FEEDSTOCK FORM Diameter: 60mm Length: Approx. 700mm (may vary) Material does not flow by gravity, so positive feeding is required 3) REQUIRED THROUGHPUT The extruder must cover two operating modes Mode1 - 260kg/hr Mode 2 - 435kg/hr 4) EXTRUDER REQUIREMENTS Cold-feed single screw extruder Screw diameter approx. 90mm (supplier may propose alternative) 10: 1 to 12: 1 L/D Water-cooled screw & barrel Forced feed system (vertical crammer or powerful feed rollers) Stable discharge temperature at both throughput modes 5) GEAR PUMP (optional) two options 1) Extruder Only 2) Extruder + gear pump for improved pressure and flow stability 6) DIE Flat die Output Strip size: 60mm X 4mm Quick open design preferred for cleaning 7) CONTROLS Prefer Siemens control system Alternatively, a control system that can communicate with a Siemens PLC 8) COMMERCIAL INFORMATION provide Shipping Details (FOB/CIF) Photos of similar machines you have supplied Pete
Buyer MarketUnited Kingdom
CategoryChemicals & Materials
SubcategoryPlastics & rubber
QuantityTBD
Deadline2026-08-31
Statusquoting
Sourcing Requirements
a cold feed single screw extruder for producing a Blu Tack type adhesive compound. review the technical requirements below and confirm that you can supply a suitable machine, along with and delivery time 1) MATERIAL Blu-Tack type adhesive compound Pre-mixed, cohesive, non-free flowing Cold extrusion only (no additional heating) Shear-sensitive material Density approx. 1.2kg/L 2) FEEDSTOCK FORM Diameter: 60mm Length: Approx. 700mm (may vary) Material does not flow by gravity, so positive feeding is required 3) REQUIRED THROUGHPUT The extruder must cover two operating modes Mode1 - 260kg/hr Mode 2 - 435kg/hr 4) EXTRUDER REQUIREMENTS Cold-feed single screw extruder Screw diameter approx. 90mm (supplier may propose alternative) 10: 1 to 12: 1 L/D Water-cooled screw & barrel Forced feed system (vertical crammer or powerful feed rollers) Stable discharge temperature at both throughput modes 5) GEAR PUMP (optional) two options 1) Extruder Only 2) Extruder + gear pump for improved pressure and flow stability 6) DIE Flat die Output Strip size: 60mm X 4mm Quick open design preferred for cleaning 7) CONTROLS Prefer Siemens control system Alternatively, a control system that can communicate with a Siemens PLC 8) COMMERCIAL INFORMATION provide Shipping Details (FOB/CIF) Photos of similar machines you have supplied Pete