Sourcing Requirements
a rollforming machine that will be able to produce two kinds of profiles with small adjustments to them with fine tuning The profiles that Required: the machine to be able to produce are attached in the email. have a look at them The machine that we are asking from you to produce for us will have to meet the following specifications 1. Ability of metal sheet thickness to be formed 1,5mm - 2,0mm - 2,5mm and 3mm. The metal to be formed will be galvanized, or black coated steel of S235 (Fe 360 or St37) and S275 (Fe 430 or St 44) 2. Two lines to be operating simultaneously to be able to produce the two profiles at the same time (either on a single machine or different machines) 3. Required: the profile to be able to be automatically cut while in motion in angles of 45 degrees and vertically (independenetly) 4. The machine must have a decoiler for both the lines 5. Straightening steel sheet machine 6. Production speed 8m/min for each line 7. Easy fine tuning of each line, changing of the roller for each profile 8. To be able to drill a hole of 8mm every 250mm of produced material or 12mm every 500mm We would like to have the final cost with assembly to Greece, the time of delivery etc I would appreciate your swift respnce to our request