Sourcing Requirements
As company SEZ, we are a partner in the development of a special scalable battery pack that will power N1G (off-road) utility vehicles for the European market. The battery pack will have a capacity of approximately 35 kWh. For its development and testing, we are requesting cells with the following chemical composition LiFePO and NMC in the following quantities with following parameters LFP Producer CATL/alternative Quality A (Automotive)* Dimensions 160(L) ×115 (H)X50 (B)mm Capacity 105Ah Working current 1C Maximál current 2C and more* Mass 1, 98kg Internal resistance 0, 5 miliohm Service SWS (Stud Welding Service) Studs M8 with lenght 15mm* Delivery PCS: 200 Date of planed delivery: April / mai 2026 Project use: Research / development Note.: * Critical parameters: Grade A quality, automotive use, max. Current more as 2C, studs M8 with the lenght 15mm NMC Application elektric car N1/N2 Dimensions 148(L)X100(H)X40(B) max. Dimensions 172(L)X100(H)X44 (B)* Capacity 86Ah 60Ah and more, max. 300Ah* Oper. Current 1C Max. Current 2C and more* Mass 1, 38kg Internal resistance 0, 3 miliohm Studs M8 lenght 15mm*(if possible - dimension between studs 130 mm Date of delivery: April 2026 Use in the project: Research / development Note.: * Critical parameters: Qality grade A, automotive use, max. Dimensions, capacity between 60Ah and 300Ah, max. Current more than 2C, studs M8 with lenght 15mm Attached pictures are only generated examples of cells Required: and the example vehicle that will use the battery pack